Model |
CMP20 / CMP30 |
Printing method |
Line thermal dot printing |
Printing width |
CMP-20: 48mm / 1.88 inches CMP-30: 72 mm / 2.83 inches |
Dot pitch |
8 × 8 dots/mm (203dpi × 203dpi) |
Printing speed |
CMP-20: Up to 80mm/sec CMP-30: Up to 100mm/sec |
Number of print columns |
Font |
Maximum number of characters (columns) |
CMP-20 |
CMP-30 |
Font A |
32 |
48 |
Font B |
42 |
64 |
|
Character type |
ASCII, Alphanumeric characters, International characters, Windows code page |
Paper |
CMP-20: Thermal paper roll width: 58mm, diameter up to 48mm CMP-30: 25-80mm, 1.00-3.15 inches, diameter up to 56mm |
Interface |
Serial (RS-232C): Standard up to 15,000 bps, 7 or 8 bit, 8-pin mini-DIN Connector USB: Standard USB 2.0 mini connector type B Bluetooth: Factory Option, Class 2, Version 2.0, 2.4Ghz FH, 10 meters, up to 115Kbps, SPP profile Wireless LAN: Factory Option, 802.11b and 802.11g standards, 100 meters, 64/128 bit WEP, WPA, up to 54Mbps |
Case design |
High-impact ABS plastic |
Sensors |
Paper end, Cover-open, Low battery, Head temperature |
Mag stripe card reader |
Factory Option: ISO 7811/2, JIS standards, dual track (1+2,2+3), 10-15 cm/s swipe speed |
Power source |
Battery: Li-ion battery pack AC adapter only for charging (Output DC9V, 1.0A) |
Battery |
Battery type: Li-ion battery pack Battery pack voltage: 7.4 V Battery pack capacity: CMP-20 1900 mAh, CMP-30 2200mAh |
Charger |
Input: 100V-240V AC, 50/60Hz, Output: .4 volts, 1200mA (Charger included) |
Weight (approx.) |
CMP-20: 442 grams (approx. 1.0 lbs) CMP-30: 630 grams (approx. 1.4 lbs) |
Outer dimensions (W × D × H) |
CMP-20: 96 X 136 X 58 mm CMP-30: 120 x 152 x 70 mm |
Operating temperature and humidity |
5 to 40 °C, 35 to 80 % RH (no condensation) |
Storage temperature and humidity |
-20 to 60 °C, 10 to 90 % RH (no condensation) |
Emulations |
CMP-20: ESC/POS™ CMP-30: ESC/POS™ and CPCL™ compatibility |
Drivers |
Windows compatible drivers for desktop and mobile operating systems |